Technical Support Line: 403.720.7727

KE-Pull

KE-Pull Cross Key Puller with Adapters

Cross Key Puller with Adapters

  • 20 Ton Cross Key & Pin Puller
  • Patented design allows for multiple adapters to be used with a single frame.
  • Swivels 360 Deg. to best find a reaction point.
  • Operates with a 10,000 psi hydraulic system.
  • 3 Points to attach Safety Harness.
  • Lightweight Pull Frame.
  • Requires the appropriate adapters shown below.

PUMPS

Patented dovetail design allows multiple adapters to be used with a single pull frame. All adapters are placed on the work area and attached to the KE Pull with a dovetail fitting. This reduces the need for heavy lifting.

Rotating adapters allow for locating the best reaction points.

Hex 34

 

KE-Pull Adapters

360° Articulated Pin Puller Adapter

360° Articulated Pin Puller Adapter

  • Used to pull connector pins on articulated cars.
Low Profile Pulling Forks

Low Profile Pulling Forks

  • Low head designed for removing E-Keys.
LPForksinuse

Used where there is no room
between the train line and the key

qpadapt

360° Quick Pull Adapter

  • Used on the head of the cross key.
qpinuse

Used when there is room between
the key head and the train line

360° Reverse Pull Adapter

360° Reverse Pull Adapter

  • Allows the cross key to be pulled from the retaining pin hole by cutting the head off.If the
  • Key is no longer usable, the easiest success for removal is by pulling from the back side after the head has been cut off.
Reverseinuse

Key is removed by cutting off the key
head and pulling from the back side